• Pack
Solenoid valve fluids 1/4 2/2 open direct drive 12vcc 6.5W - adajusa.es
Solenoid valve fluids 1/4 2/2 open direct drive...
Solenoid valve coil 12Vdc 6.5 W T22 diameter 10 - adajusa.es
Solenoid valve connector size 22
Solenoid valve fluids 1/4 2/2 open direct drive 12vcc 6.5W - adajusa.es
Solenoid valve fluids 1/4 2/2 open direct drive 12vcc 6.5W D.2.5
Solenoid valve coil 12Vdc 6.5 W T22 diameter 10 - adajusa.es
Solenoid valve connector size 22

Solenoid valve fluids 1/4 2/2 open direct drive 12vcc 6.5W D.2.5

€34.24 Tax included

€28.30 tax excl.

Electrovalve for home automation,fluids or process control, threaded 1/4" body in brass. Direct drive electrovalve, 2-way open (NA), actuator Ø for 10mm coil. Step diameter: 2.5 mm

Coil for electrovalve size 22mm, voltage 12Vcc., with a consumption of 6.5W, for cores of Ø10mm.

Max pressure 6.1 bar. Min. pressure: 2.2 bar.

fluids:

  • air.
  • Inert gas.
  • Water (max. 75ºC).
  • Mineral oils.
  • Gasoleos.

Esquema neumático electroválvula 2 vías abierta
Manufacturer: Aignep
Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

 

1/4", 2-way direct drive solenoid valve, normally open (NA), for use with fluids or air, indirectly operated. Brass body and coil control in stainless steel. Pitch diameter: 2.5 mm

Coil for solenoid valve size 22mm, voltage 12Vdc., with a consumption of 6.5W, for cores of 10mm.

In this type of solenoid valves, direct drive, can work from 2.2 bar of pressure to the maximum working pressure.

The working pressure ranges are:

  • Minimum pressure differential between inlet and outlet (P bar): 0 bar.
  • Maximum pressure differential between inlet and outlet (P bar):
    • With 22mm 6.5W coil size: 6.1 bar.
    • With coil size 22mm of 7.5VA: 6.1 bar.
    • With 30mm 8W coil size: 6.1 bar.
    • With coil size 30mm of 11VA: 6.1 bar.
  • Maximum permissible pressure: 6.1 bar

The solenoid valve is normally closed, i.e. without tension in the coil, the fluid or air will be interrupted through the solenoid valve, when the coil is put into tension the passage of the fluid or air will occur.

Supply includes:

  • Solenoid valve 1/4" 2/2 NA.
  • Coil 12Vcc 6.5 W size 22.
  • Connector size 22.

The fluids with which this solenoid valve can work are:

  • air.
  • Inert gases.
  • Water (maximum temperature 75oC).
  • Mineral oils.
  • diesel.
  • fuel oil.

specifications:

  • Manufacturer: Aignep
  • Control type: direct drive.
  • Thread size: 1/4".
  • Number of tracks: 2.
  • Number of positions: 2.
  • Configuration: 2/2 open (NA).
  • Operator shaft diameter (for coil): 10mm.
  • Body: Brass.
  • Guide tube, nuclei and spring: Stainless steel.
  • Gasket type: NBR.
  • Fluid type: Pressure air, water (max. 75oC), mineral oils, diesel, oil.
  • Maximum pressure: 6.1 bar.
  • ISO size 228: 1/4".
  • Step: 2.5mm.
  • Maximum fluid viscosity (cSt): 53.
  • Valve coefficient (Kv): 0.15 m3/h.
  • Minimum pressure differential (P bar): 0 bar.
  • Maximum pressure differential (P bar): 6.3 bar depending on the power of the coil.
  • Working temperature of the solenoid valve: -10oC to +80oC.
  • Fluid temperature: -10oC to +90oC.

Dimensiones electroválvula 1/4 mando directo 2/2
Material for professional use, install in compliance with the regulations in force at the place of installation.

To expand the information you can download the data sheet by clicking on the tab "Attachments"

Questions

Be the first to ask a question about this product!

Question about the product

* Required fields
(read)

16 other products in the same category:

Reviews
Product added to wishlist
Product added to compare.