Three-phase differential switch (4 poles) of 100A 300 mA of high immunization type "F", 4 poles for protection of people against insulation or bypass problems in installations or electrical elements. For use in domestic, tertiary and industrial sectors.
Shooting occurs when there are sine residual alternating currents as well as type A currents, as well as residual currents with multiple frequencies as a result of nonlinear and distorted loads, such as those produced by frequency inverters (frequency converters). Type F differential switches are capable of detecting multiple frequencies up to 1kHz.
The detection, evaluation and shooting functions for these switches do not depend on voltage. The shot is not affected by low-value DC residual currents up to 10mA. The Type F differential switch has the delayed trigger feature to prevent unwanted firing. Another feature is high immunity against 8/20us current waveforms (up to 3 kA). This switch is installed like any differential switch. Complies with EN 61008 and EN 62423.
These differentials are electromagnetic operating, which allows not to lose the safety function in case of voltage variations. Only with the derivation in the active phase does the differential fire occur. Being electromechanical operation provides a wide operating voltage margin (230/400 VAC), which implies a high degree of immunity to variations in the input voltage, not also losing the safety function to the power failure in neutral.
IPosition of the neutral on the left side.
Technical details:
- Manufacturer/Supplier: Hyundai Electric
- Reference: SI4100300
- Number of poles: 4
- Employment in the domestic, tertiary and industrial sectors
- Electromechanical type
- Class: Superimmunized F
- Operating voltage: 230/400 Vac
- Nominal intensity (In): 100A
- Sensitivity: 0.3A - 300mA
- Cutting power (Icu): 10kA
- Connection capacity: cable 1...35 mm2
- Allows the use of PIN connection combs
- Electrical/mechanical resistance: MIn. 2000
- Degree of protection IP20
Visual contact position indicator: Red-ON, Green-OFF.
Dimensions (Height x Depth x Width): 85x58x70mm
Installation position: Vertical/Horizontal
Auxiliary contacts: No.
- Detects alternating, alternating leakage currents with continuous component and mixed frequency up to 1kHz. Currents up to 10 mA in DC do not affect behavior.
- Increased the ability to fire current resistance and overvoltage current-shaped overvoltage 8/20's up to 3 kA.
- Regulations: IEC/EN 61008-1
CE marking
English 
Español
Italiano
Adajusa FRANCE
Adajusa PORTUGAL
