Grid with filter and built-in fan, for ventilation in electrical and electronic cabinets. Made of plastic material (according to UL94 V-O), gray color. Operating voltage 230Vac 50/60Hz.
The external dimensions of the grille are 255x255mm, it allows the front opening for the maintenance of the filter element.
200x200x60mm fan with axial ball bearings, high performance 706 m3/h.
This type of fan with grid and filter is used to provide optimal climate in electrical and electronic cabinets. The temperature inside the cabinet can be reduced by facilitating the exit of hot air to the outside, avoiding the formation of hot air zones inside the electrical and electronic cabinets, protecting and increasing the useful life of electrical and electronic components and preventing their overheating. The filter prevents the entry of impurities into the cabinet.
The filter is made of synthetic material, it must be cleaned and replaced depending on the accumulated dirt and operating time. A dirty filter reduces the efficiency of the ventilation system.
Main technical characteristics:
- Supplier/Manufacturer: Mixvil/OMU
- Reference: FAN-255/200
- Fan Type: Axial Ball Bearing
- Operating voltage: 230Vac 50/60Hz
- Power: 60W
- Air flow: 706 m3/h
- Exterior dimensions: 255 x 255 mm
- Cutting dimensions: 223 x 223 mm
- Fan dimensions: 200 x 200 x 60 mm
- Grille material: Self-extinguishing ABS, according to UL94 V-O
- Filter material: Reusable synthetic fiber, self-extinguishing (class F1)
- Fan Material: Aluminum body and metal rotor
- Operating temperature: -25ºC to +65ºC
- Storage temperature: -40ºC to +70ºC
- Operating/storage humidity: max. 75% RH (non-condensing)
- Service life: Min. 56,000 hours of operation (at 40ºC)
- Connection: via cables
- Fastening by 4 screws
- Protection: IP54
- Color: Grey RAL 7035
A = 255 mm
Material for professional use, install in compliance with current regulations at the place of installation.
English 
Español
Italiano
Adajusa FRANCE
Adajusa PORTUGAL
