Soft starter 7.5kw 16A 400V 2 analog phases
Soft starter 7.5kw 16A 400V 2 analog phases

Soft starter 7.5kw 16A 400V 2 phases analog

€338.38 Tax included

€279.65 tax excl.

Two-phase control soft starter for starting 7.5Kw 10CV motors with normal load with a maximum number of 15 starts per hour, is microprocessor controlled, adjustments are made by front potentiometers. The use of soft starters allows to increase engine life by reducing mechanical stress and starting currents.

Reference: 2576140016

Representative image for illustrative purposes, the item supplied will correspond to the indicated specifications.

No queries yet, leave the first!
 

Two-phase control soft starter for starting 7.5Kw 10CV 400Vac motors with normal load with a maximum number of 15 starts per hour. Allows for a clean and smooth electronic engine start. This type of soft starters provides control of two of the phases while keeping the other direct, the torque of the engine corresponds to the performance of the chart and provides good acceleration.

The use of soft starters, soft starters, avoid mechanical stress and peaks of consumption in the engine, so they manage to increase the life of the engine and optimize the performance of the installation.

Soft starters are designed to replace the classic star-delta starters.

Load Capacity:

  • Power in soft charging, direct connection: 7.5Kw (10CV), start in lower time in 5 seconds. I-3xIn.
  • Power in heavy load, direct connection: 5.5Kw (7.5CV,) start in time less than 10 seconds. I-4.5xIn.

Features:

  • Soft starter control 2 phases.
  • Microprocessor controlled.
  • Optimized soft start.
  • Reduction of peak current and torque strike in acceleration.
  • Standard DIN rail mount facil 35mm.
  • Integrated bypass relay.
  • Parameterization by means of three potentiometers.
  • No additional control voltage required.
  • Do not require neutral network conductor (N).
  • Economical substitute for star-delta starters.
  • Compact design 45mm.
  • Degree of protection IP20.

Functions:

  • Smooth acceleration and deceleration.
  • Potential-free control input for smooth acceleration and deceleration.
  • 3 parameters adjustable separately: Acceleration time, start voltage and deceleration time.
  • Selectable start-up impulse.
  • Potential-free relay output to indicate operating status - bypass unit - and failure (optional).
  • Stop/march state relay (from start of acceleration to end of deceleration (M).

Typical applications:

  • Engines for doors and gates.
  • Bombs, fans.
  • Conveyor belts, assembly lines.

Technical details:

  • Manufacturer: Peter Electronic
  • Ref: 2576140016
  • Voltage: 400Vac.
  • Rated current: 16A.
  • Nominal power: 7.5Kw.
  • Max. switching frequency at 3xIny 5s tan: 15/h.
  • Max. power dissipation:
    • During operation: 7W.
    • Standby: 2.5W.
  • I2t - Power Semiconductors in A2s: 4000.
  • Min. engine load: 20%.
  • Acceleration ramp type: Current limit.
  • Boot time: 0.5..10s.
  • Starting voltage: 40..80%.
  • Stop time: 0.25..10s.
  • Restart time: 300ms.
  • Output contact capacity: 2A/250Vac/30Vdc.
  • Nominal insulation voltage (Ui):
    • Main circuit: 500V.
    • Control and auxiliary circuit: 250V.
  • Weight: 400g.
  • Dimensions: 45x110x121mm.

Dimensiones arrancadore suave VSII 3.5-16A

Conexionado arrancador suave VSII 3.5-16A

Material for professional use, install in compliance with the regulations in force at the installation site.

Questions

Be the first to ask a question about this product!

Question about the product

* Required fields
(read)

Responsible: ADAJUSA (CONSTRUCCIONES PBR, S.L.), purpose: Respond to requests for information, legitimacy: consent of the interested party, recipients: data will not be communicated to third parties, rights: Access, rectify and delete data, as well as other rights, as explained in the additional information. (read)

8 other products in the same category:

Customers who bought this product also bought:

Product added to wishlist
Product added to compare.