• Pack
Solenoid valve fluids 1/2 2/2 24Vac 22VA...
Solenoid valve fluids 1/2 2/2 24Vac 22VA indirect drive INOX FKM

Solenoid valve fluids 1/2 2/2 24Vac 22VA indirect drive INOX FKM

€72.14 Tax included

€59.62 tax excl.

Electrovalve for home automation, fluids or process control, threaded 1/2 " in INOX AISI 316. Closed 2-way membrane valve (NC) indirect drive. Hole diameter: 13 mm

Working pressure max. 13 bar. pressure dif. min. 0.5 bar.

Coil for electrovalve size 30mm, voltage 24Vac., with a consumption of 22VA. Connector 30 mm.

FKM gaskets: Temperature: -10º to +140º C. Fluid: Air, inert gas, water max 75º C, mineral oils, gasoline, fuel oil.



Manufacturer: Aignep
Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

 

1/2" membrane valve, 2-way, normally closed (NC), for fluid use, indirect drive. Body: INOX AISI 316.

Coil for electrovalve size 30mm, voltage 24Vac., with a consumption of 22VA.

Plastic connector 30 mm.

Hole diameter: 13 mm

The main hole of the valve body is opened by the effect of an imbalance between the upper and lower surfaces of the membrane, when the coil is not activated, there is pressure in the upper chamber of the membrane, while in the lower chamber there is only pressure in the main hole of the valve , keeping it closed. When we give tension to the coil, we set the moving core in motion, opening the piloting hole and doing the discharge of fluid from the upper chamber, the pressure difference at this time causes it to open the main hole.

In this type of electrovalves there must be a small pressure difference between the inlet and the outlet for it to work properly.

The supply includes:

  • 1/2" 2-way NC valve
  • Coil 24Vac 22VA
  • 30 mm connector

specifications:

  • Manufacturer: Aignep
  • Reference: RSP-15J
  • Type of control: indirect drive.
  • Thread size: 1/2".
  • number of tracks: 2.
  • number of positions: 2.
  • Configuration: 2/2 closed (NC)
  • Coil voltage: 24Vac
  • Consumption: 22VA
  • Body: INOX AISI 316.
  • Guide tube, cores and spring: Inox.
  • Type of gasket: FKM.
  • Type of fluids: Press and press on air, water (max. 75ºC), mineral oils, diesel, fuel oil.
  • Maximum pressure: 13 bar.
  • Iso 228 size: 1/2".
  • Ø step: 13.
  • Minimum pressure differential (ΔP bar): 0.5 bar.
  • Maximum pressure differential (ΔP bar): 13
  • Working temperature of the electrovalve: -10ºC to +80ºC.
  • Fluid temperature: -10ºC to +140ºC.
  • Installation: Never with the coil down.


Material for professional use, install respecting the regulations in force at the place of installation.

For more information you can download the technical data sheet by clicking on the "Attachments" tab

Questions

Be the first to ask a question about this product!

Question about the product

* Required fields
(read)

16 other products in the same category:

Customers who bought this product also bought:

Reviews
Product added to wishlist
Product added to compare.