Cap 9mm to 11mm drive shaft or reducer adapter
Cap 9mm to 11mm drive shaft or reducer adapter

Cap 9mm to 11mm drive shaft or reducer adapter

€7.21 Tax included

€5.96 tax excl.

Cap 9/11 adapter for motor or gearbox shaft, inner diameter 9mm and outer diameter 11mm. Made of steel, this adapter bushing allows to increase the diameter of a motor shaft to adapt it to the input of a gearbox or any other application.


Reference: 9/11


Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

No queries yet, leave the first!
Privacy
Shipments
Returns
 
Cap adapter with inner diameter 9mm and outer diameter 11mm. Allows to adapt the output shaft of a motor to the input shaft of a gearbox or any other type of application.

Made of ground steel.
The supply includes the key for the bushing.



Technical specifications
  • Part number: 9/11
  • Material: Steel
  • Finish: ground
  • Inside diameter: 9mm
  • Outside diameter: 11mm
  • Key: included



Material for professional use, must be installed in compliance with the regulations in force at the place of installation.

Questions

Be the first to ask a question about this product!

Question about the product

* Required fields
(read)

16 other products in the same category:

Tensioning rails for... Tensioning rails for... 2
Tensioning guides for electric motors

Tensioning rails for electric motors size 100-132 rail length 495mm

Generico-MOT
LMGT495/10
€100.35 (€82.93 tax excl.)
Tensioning rails for electric motors with housing sizes 100 and 132. They allow the displacement of the motors while maintaining their alignment at all times. Simple mechanism and easy installation. Rail length 495mm. Delivery includes 2 pieces: two shaft guides each with two sliding fixing blocks.Reference: LMGT495/10Representative image for...
Tensioning rails for... Tensioning rails for... 2
Tensioning guides for electric motors

Tensioning rails for electric motor size 200-225 rail length 686 mm

Generico-MOT
LMGT686/16
€271.43 (€224.32 tax excl.)
Tensioning rails for electric motors with housing sizes 200 and 225. They allow the displacement of the motors while maintaining their alignment at all times. Simple mechanism and easy installation. Rail length 495mm. Delivery includes 2 pieces: two shaft guides each with two sliding fixing blocks.Part number: LMGT686/16Representative image for...
Tensioning rails for... Tensioning rails for... 2
Tensioning guides for electric motors

Tensioning rails for electric motor size 80-90 rail length 375mm

Generico-MOT
LMGT375/8
€67.87 (€56.09 tax excl.)
Tensioning rails for electric motors with housing sizes 80 and 90. They allow the displacement of the motors while maintaining their alignment at all times. Simple mechanism and easy installation. Rail length 375mm. Delivery includes 2 pieces: two shaft guides each with two sliding fixing blocks.Reference: LMGT375/8Representative image for illustrative...
Tensioning base for... Tensioning base for... 2
Bases tensoras para motores eléctricos

Tensioning base for electric motor size 160 to 180

Generico-MOT
LMBTSMA490A
€105.12 (€86.88 tax excl.)
Tensioning base for electric motors with housing sizes between 160 and 180. Allows adjustment and regulation of belt tensioning and alignment without disassembling the motor. Adjustable plate displacement by means of standard screw. Part number: LMBTSMA490ARepresentative image for illustrative purposes, the item supplied will correspond to the...
Tensioning base for... Tensioning base for... 2
Bases tensoras para motores eléctricos

Tensioning base for electric motor size 180 to 200

Generico-MOT
LMBTSMA490
€121.36 (€100.30 tax excl.)
Tensioning base for electric motors with housing sizes between 180 and 200. Allows adjustment and regulation of belt tensioning and alignment without disassembling the motor. Adjustable plate displacement by means of standard screw. Part number: LMBTSMA490Representative image for illustrative purposes, the item supplied will correspond to the...
Tensioning base for... Tensioning base for... 2
Bases tensoras para motores eléctricos

Tensioning base for electric motor size 132-B

Generico-MOT
LMBTSMA340
€82.23 (€67.96 tax excl.)
Tensioning base for electric motors with housing size 132-B. Allows adjustment and regulation of belt tensioning and alignment without disassembling the motor. Adjustable plate displacement by means of standard screw. Part No.: LMBTSMA340Picture is representative for illustrative purposes, the item supplied will correspond to the specifications indicated.
Tensioning base for... Tensioning base for... 2
Bases tensoras para motores eléctricos

Tensioning base for electric motor size 160

Generico-MOT
LMBTSMA450
€99.40 (€82.15 tax excl.)
Tensioning base for electric motors with housing size 160. Allows adjustment and regulation of belt tensioning and alignment without disassembling the motor. Adjustable plate displacement by means of standard screw. Part No.: LMBTSMA450Picture representative for illustrative purposes, the item supplied will correspond to the specifications indicated.
Tensioning rails for... Tensioning rails for... 2
Tensioning guides for electric motors

Tensioning rails for electric motor size 80-90 rail length 312 mm

Generico-MOT
LMGT312/8
€62.13 (€51.35 tax excl.)
Tensioning rails for electric motors with housing sizes 80 and 90. They allow the displacement of the motors while maintaining their alignment at all times. Simple mechanism and easy installation. Rail length 312mm. Delivery includes 2 pieces: two shaft guides each with two sliding fixing blocks . Reference: LMGT312/8Representative image for illustrative...
Tensioning rails for... Tensioning rails for... 2
Tensioning guides for electric motors

Tensioning rails for electric motor size 160 rail length 495mm

Generico-MOT
LMGT495/12
€100.35 (€82.93 tax excl.)
Tensioning rails for electric motors with housing size 160. They allow the displacement of the motors while maintaining their alignment at all times. Simple mechanism and easy installation. Rail length 495mm. Delivery includes 2 pieces: two shaft guides each with two sliding fixing blocks.Reference: LMGT495/12Representative image for illustrative...
Home
Reviews
Product added to wishlist
Product added to compare.