Limit Switch lever roller 3/2 NC diameter M5 rear fittings - Metal Work

Name: Limit Switch lever roller 3/2 NC diameter M5 rear fittings - Metal Work
Brand: Metal Work
SKU: W3501000211
Price: 20.4594 EUR
Availability: InStock

€20.46 Tax included

€16.77 tax excl.

limit switch lever-operated tire with roller, fittings (axial connections) located at the rear for M5 outer diameter tube. The valve type of the limit switch is normally closed (NC).

Reference: W3501000211

Logotipo Metal Work

Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

No queries yet, leave the first!

Privacy

Shipments

Returns

limit switch roller lever drive pneumatic, with integrated quick-connect fittings for M5 outer diameter tube. The state of the valve at rest is normally closed, that is, without pressing there is no presence of air in the exit, the air can not pass, when it is activated, it lets the air pass and there is pneumatic pressure at the outlet.

Manufacturer: Metal Work

Minivalve: 3/2 Normally closed (NC).
Type of limit switch drive: lever with roller.
Manufacturer reference: W3501000211 - VME1-12 NC M5
Reduced drive force.
Signal speed and pressure.
Material type: metallic.
Fittings: fast for tube diameter M5 axial connection.
Installation: in any position.
Fluid: Compressed air filtered without lubrication; lubrication, if used, must be continuous.
Working pressure (bar): 0.5 ÷ 10
Working temperature (°C): -10° ÷ +60
Nominal diameter (mm) 2.5
Conductance C (Nl/min · bar): 16.5
Critical ratio b (bar/bar): 0.03
Capacity at 6 bar ΔP 0.5 bar (Nl/min): 35
Capacity at 6 bar ΔP 1 bar (Nl/min): 60
Strut drive force at 6 bar (N): 8
Lubricant recommended: ISO and UNI FD22

Material for professional use, install in compliance with the regulations in force at the place of installation.

To expand the information you can download the technical sheet by clicking on the "Attachments" tab

Minivalves

Download (794.37KB)

Questions

Be the first to ask a question about this product!

Question about the product

Name ^*

Email ^*

Question ^*

^* Required fields

I have read and agree to the conditions of use (read)

Responsible: ADAJUSA (CONSTRUCCIONES PBR, S.L.), purpose: Respond to requests for information, legitimacy: consent of the interested party, recipients: data will not be communicated to third parties, rights: Access, rectify and delete data, as well as other rights, as explained in the additional information. (read)

Limit Switch tyre 3/2 NO rear fittings diameter 4 - Metal Work

Metal Work

W3501000101

€20.24 (€16.59 tax excl.)

Limit Switch pneumatic (mini-valve) with push-button drive, fittings located at the rear for 4 mm outer diameter tube. The valve type of the limit switch is normally open (NO).Reference: W3501000101 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Pneumatic Limit switchs

Limit switch pneumatic roller 3/2 NC diameter 4 side fittings - Metal Work

Metal Work

W3501001201

€23.42 (€19.20 tax excl.)

Limit Switch pneumatic with roller drive, fittings located on the side, for outer diameter tube of 4 mm. The valve type of the limit switch is normally closed (NC). Reference: W3501001201 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Pneumatic Limit switchs

Limit Switch tyre 3/2 NC side fittings diameter 4 - Metal Work

Metal Work

W3501001101

€19.67 (€16.12 tax excl.)

limit switch pneumatic with push-button drive, fittings located on the side for outer diameter tube of 4 mm. The valve type of the limit switch is normally closed (NC). Reference: W3501001101 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Pneumatic Limit switchs

Limit Switch tyre 3/2 NO side fittings diameter 4 - Metal Work

Metal Work

W3501001100

€21.87 (€17.93 tax excl.)

limit switch pneumatic with push-button drive, fittings located on the side for outer diameter tube of 4 mm. The valve type of the limit switch is normally open (NA). Reference: W3501001100 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Pneumatic Limit switchs

Limit Switch tire piston NC 3/2 diameter 4 - Metal Work

Metal Work

W3501001401

€21.31 (€17.47 tax excl.)

Limit Switch pneumatic,fittings located on the side, for tube outer diameter of 4 mm. The valve type of the limit switch is normally closed (NC). Reference: W3501001401 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

16 other products in the same category:

Pneumatic Limit switchs

Limit switch 3/2 NC pneumatic strut 3/2 NC side fittings diameter 4 mm- Aignep

Aignep

02VG03NCX1

€16.08 (€13.18 tax excl.)

Limit switch pneumatic strut pneumatic 3 way and 2 positions, monostable, normally closed (NC) and fittings located on the side for tube outer diameter of 4 mm. Prepared for mounting with emergency pushbutton or similar. Series: 02VPart no.: 02VG03NCX1 Representative image for illustrative purposes, the item supplied will correspond to the...

Limit Switch 1/8 5-way tyre - Metal Work - adajusa.es

Pneumatic Limit switchs

Limit Switch 1/8 5-way strut tyre - Metal Work

Metal Work

7001000110

€30.46 (€24.97 tax excl.)

limit switch pneumatic drive with pushbutton drive, 1/8" 5-way mechanical drive. Drive by mechanical strut spring return. Reference: MEV 25 TAS OO - 7001000110 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Pneumatic Limit switchs

Limit Switch tire piston NC 3/2 diameter 4 - Metal Work

Metal Work

W3501001401

€21.31 (€17.47 tax excl.)

Pneumatic Limit switchs

Limit Switch pneumatic roller 3/2 NO side fittings diameter M5 - Metal Work

Metal Work

W3501001210

€23.40 (€19.18 tax excl.)

Limit Switch pneumatic with roller drive, fittings located on the side, for M5 outer diameter tube. The valve type of the limit switch is normally open (NA). Reference: W3501001210 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Pneumatic Limit switchs

Limit Switch tyre 3/2 NO side fittings diameter 4 - Metal Work

Metal Work

W3501001100

€21.87 (€17.93 tax excl.)

Pneumatic Limit switchs

Limit Switch lever roller 3/2 NC diameter 4 rear fittings - Metal Work

Metal Work

W3501000200

€21.80 (€17.87 tax excl.)

limit switch lever-operated tire with roller, fittings (axial connections) located at the rear for 4 mm outer diameter tube. The valve type of the limit switch is normally closed (NC). Reference: W3501000200 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Pneumatic Limit switchs

Limit switch push button pneumatic red 1/8 3/2 NC monostable with spring-return - Aignep

Aignep

03VH03NC02

€27.39 (€22.45 tax excl.)

Limit switch pneumatic 1/8 3 way and 2 positions, for mounting with emergency push button or similar. The limit switch is actuated by means of the red push button. Series: 03VPart number: 03VH03NC02 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Pneumatic Limit switchs

Limit Switch long cam tire with roller 1/8 3/2 NC - Mindman

Mindman

EPA105L

€21.42 (€17.56 tax excl.)

Limit Switch long cam tire with roller,mechanically operated pneumatic valve with cam with metal roller, thread 1/8 3 ways normally closed (NC).Reference: 281EPA105L Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Pneumatic Limit switchs

Limit Switch mechanical drive 1/8 3-way roller - Metal Work

Metal Work

7001000500

€40.55 (€33.24 tax excl.)

limit switch pneumaticvalve, mechanically operated pneumatic valve, 1/8 3-way thread. The limit switch is driven by a roller lever. Reference: 7001000500 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Pneumatic Limit switchs

Limit Switch 3/2 NC one-way cam diameter 4 side fittings - Metal Work

Metal Work

W3501001301

€25.08 (€20.56 tax excl.)

Limit Switch pneumatic with unidirectional cam drive, fittings located on the side, for outer diameter tube of 4 mm. The valve type of the limit switch is normally closed (NC). Reference: W3501001301 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Pneumatic Limit switchs

Limit Switch tyre 1/8 3/2 NC - Mindman

Mindman

EPA100

€19.23 (€15.76 tax excl.)

Limit Switch pneumaticvalve, mechanically operated pneumatic valve, 1/8 3-way normally closed (NC) thread. The limit switch is driven by front piston.Reference: 281EPA100 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Pneumatic Limit switchs

Limit switch servo-piloted strut tire 1/8 5/2 monostable with spring-return - Aignep

Aignep

01VV050002

€43.47 (€35.63 tax excl.)

Limit switch pneumatic of 1/8 5 way and 2 positions, for mounting with emergency push button or similar. Actuated by servo-piloted strut. Series: 01VReference: 01VVV050002 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Pneumatic Limit switchs

Limit switch 3/2 NC unidirectional cam pneumatic 3/2 NC monostable with side fittings...

Aignep

02VU03NCB5

€18.98 (€15.56 tax excl.)

Limit switch pneumatic with unidirectional M5 cam actuator 3 way and 2 positions, fittings located on the side for tube outside diameter M5. The type of limit switch valve is normally closed (NC). Series: 02VPart no.: 02VU03NCB5 Representative image for illustrative purposes, the item supplied will correspond to the specifications shown.

Pneumatic Limit switchs

Final de carrera neumática 3/2 NC racores laterales diámetro 4- Aignep

Aignep

02VD03NCX1

€17.67 (€14.48 tax excl.)

Limit switch 4 mm pneumatic 3 way and 2 positions, fittings located on the side for tube outer diameter of 4 mm. Prepared for mounting with emergency push button or similar. Series: 02VPart number: 02VD03NCX1 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Pneumatic Limit switchs

Limit switch short roller tire 3/2 NC monostable with side fittings diameter M5 - Aignep

Aignep

02VR03NCB5

€16.93 (€13.88 tax excl.)

Limit switch pneumatic with M5 roller actuator 3 way and 2 positions, fittings located on the side for M5 O.D. tube. The type of limit switch valve is normally closed (NC). Series: 02VPart no.: 02VR03NCB5 Representative image for illustrative purposes, the item supplied will correspond to the specifications shown.

Pneumatic Limit switchs

Limit Switch cam tire with roller 1/8 3/2 NC - Mindman

Mindman

EPA105

€21.42 (€17.56 tax excl.)

Limit Switch pneumatic cam with roller,mechanically operated pneumatic valve with cam with metal roller, thread 1/8 3 ways normally closed (NC).Reference: EPA-105 Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated.

Customers who bought this product also bought:

Contactors 3 poles coil 230Vac

Three-phase contactor 9A 230Vac open auxiliary contact NA TR1D Series

TR1D0910

€9.61 (€7.88 tax excl.)

Three-phase electric contactor equipped with high-capacity contacts, with 85% silver, for controlling electric motors, heating, lighting, ventilation, or general uses. 3-pole contactor with current capacity of 9A category AC3 or 25A category AC1, with 230Vac coil, the contactor is equipped with an open auxiliary contact (NO).Reference: TR1D0910...

End-of-race and position detectors

Race end lever with roller - LSME Series

LSME8104

€9.63 (€7.89 tax excl.)

Limit switch electric, contacts 1NA+1NC, vertical lever operation with plastic sheave. Made with metal housing and plastic cover, very resistant to shocks. Diameter of the sheave 18mm. Part number: LSME8104Representative image for illustrative purposes, the item supplied will correspond to the specifications indicated .

Valve 1/8 3-way closed monostable (NC) - Metal Work - ADAJUSA

Valve 1/8 3-way closed monostable (NC) - Metal Work - ADAJUSA 2

Pneumatic valves 1/8

Pneumatic valve 1/8 3-way monostable closed NC - Metal Work

7010010200

€35.55 (€29.14 tax excl.)

Pneumatic valve 1/8 3-way monostable standard closed (NC). Reference: 7010010200 Representative image for illustrative purposes, the article supplied shall correspond to the specifications indicated.

Pilots

Pilot red multiled 230 Vac 22mm

AD22/R/230

€1.49 (€1.22 tax excl.)

Pilot multiled redluminous, voltage 230 Vac, diameter 22mm. High brightness and long life led chip.Reference: AD22/R/230 - AD22-22DS-R23Representative image for illustrative purposes, the supplied article will correspond to the indicated specifications.

Intermediate straight fittings

Intermediate reducing fitting 6 - 4 mm technopolymer - Metal Work

2019303

€2.46 (€2.02 tax excl.)

Straight intermediate reducing fitting for tube Ø6 - Ø4mm, manufactured in high resistance technopolymer. Fast, very simple and effective connection that allows reconnection thousands of times without compromising perfect pneumatic and mechanical retention. Valid fitting for pneumatic and vacuum installations. Reference: 2019303 Representative...

Thermal relays

Thermal regulation relay 1.6 to 2.5A TR2HD Series

TR2HD1307

€9.25 (€7.58 tax excl.)

Three-phase thermal relay for protection of three-phase and single-phase electric motors against overloads or absence of phase. The regulation of the thermal relay is between 1.6 to 2.5A. Reference: TR2HD1307 Representative image for illustrative purposes, the item supplied will correspond to the indicated specifications.

Crimper for ferrules from 0.25 to 10mm1 ERVN-10

Crimper for ferrules from 0.25 to 10mm1 ERVN-10 2

Tools

Toe crimper from 0.25 to 10 mm2

ERVN-10

€29.78 (€24.41 tax excl.)

Easy-to-use crimping tool for insulated and uninsolated toe caps, with non-slip PVC grip and high-quality steel jaw, suitable for pressing toe caps with cable diameter from 0.25 to 10 mm2. Rectangular crimp shape. Reference: ERVN-10Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Pneumatic valves 1/8

Valve 1/8 3-way bi-stable - Metal Work

7010010100

€39.16 (€32.10 tax excl.)

Valve 1/8 3-way bistable Reference: 7010010100 Representative image for illustrative purposes, the article supplied shall correspond to the specifications indicated.

View

Contact blocks

Block 4 front 2NO 2NC contacts for TR1D/TR1E Series contactors

TR6DN22

€3.40 (€2.79 tax excl.)

Block of 4 auxiliary contacts, 2 open contacts and 2 closed contacts (2NO + 2NC) for front mounting on TR1D and TR1E series contactors. Reference: TR6DN22 Representative image for illustrative purposes, the item supplied will correspond to the indicated specifications.

Valvula 1/8 5-way monostable - Metal Work - ADAJUSA

Valvula 1/8 5-way monostable - Metal Work - ADAJUSA 2

Pneumatic valves 1/8

Pneumatic valve 1/8 5/2 monostable - Metal Work

7010011100

€41.87 (€34.32 tax excl.)

Pneumatic valve 1/8 5 ways 2 positions monostable. Reference: 7010011100 Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

Home

Client support

ADAJUSA

C/ Mercurio, 7 28970 Humanes de (Spain)

+34 911354650 +34 912973850

From Monday to Thursday from 8:30 to 13:30 and 15:30 a 18:30. Friday from 8:30 to 13:30

Send a message

Your Account

Create customer account
Create Business Account

Follow us in our social

This website uses its own and third-party cookies to improve our services and show you advertising related to your preferences by analyzing your browsing habits. To give your consent to its use, press the Accept button.

More information Customize cookies

Functional cookies

Yes

Description and cookies

Functional cookies are strictly necessary to provide the services of the shop, as well as for its proper functioning, so it is not possible to refuse their use. They allow the user to browse through our website and use the different options or services that exist on it.


PHP_SESSID	adajusa.es	The PHPSESSID cookie is native to PHP and allows websites to store serialised status data. On the website it is used to establish a user session and to pass state data through a temporary cookie, which is commonly known as a session cookie. These Cookies will only remain on your computer until you close your browser.	Session
PrestaShop-#	adajusa.es	This is a cookie used by Prestashop to store information and keep the user's session open. It stores information such as currency, language, customer ID, among other data necessary for the proper functioning of the shop.	480 hours
rc::a	Google	It is used to read and filter bot requests.	Persistent
rc::c	Google	It is used to read and filter bot requests.	Persistent

Advertising Cookies

Yes

Description and cookies

These are cookies that collect information about the advertisements shown to users of the website. They can be anonymous, if they only collect information about the advertising spaces shown without identifying the user, or personalised, if they collect personal information about the user of the shop by a third party, for the personalisation of these advertising spaces.


ads/ga-audiences	Google	These cookies are used by Google AdWords to re-engage visitors that are likely to convert to customers based on the visitor’s online behaviour across websites.	Session

Analytics cookies

Yes

Description and cookies

Collect information about the user's browsing experience in the shop, usually anonymously, although sometimes they also allow the user to be uniquely and unequivocally identified in order to obtain reports on the user's interests in the products or services offered by the shop.


_ga	Google	Registers a unique ID that is used to generate statistical data on how the visitor uses the website.	2 years
_gat	Google	Used by Google Analytics to throttle request rate	1 day
_gat_gtag_UA_#	Google	Used to throttle request rate.	1 minute
_gd#	Google	This is a Google Analytics Session cookie used to generate statistical data on how you use the website which is removed when you quit your browser.	Session
_gid	Google	Registers a unique ID that is used to generate statistical data on how the visitor uses the website.	1 day

Performance cookies

Yes

Description

These are used to improve the browsing experience and optimize the operation of the shop.

Other cookies

Yes

Description

These are cookies without a clear purpose or those that we are still in the process of classifying.

Limit Switch lever roller 3/2 NC diameter M5 rear fittings - Metal Work

Questions

Question about the product

16 other products in the same category:

Customers who bought this product also bought:

Client support

Company information

Your Account

Follow us in our social