frequency converter single-phase 230Vac, 0.2Kw (0.25hp), three-phase 230V output, integrated RFI filter and programming panel.
Single-phase frequency converters (variable frequency drives) allow the control and speed variation of standard three-phase motors to patir of a single-phase supply network. They are only valid to be connected to alternating current motors.
This frequency converter model already has an RFI filter built in to avoid electromagnetic interference that could occur with other electronic components.
In the front button, it incorporates all the necessary buttons for the control of the engine and a potentiometer for the regulation of the speed. it can also be controlled from pushbuttons and external potentiometer.
The fixation can be made by screws to the mounting plate or by din-rail. The series of M frequency converters of the LS brand incorporates:
- potentiometer.
- 3 Programmable speeds with activation through inputs.
- Communication RS485.
- Integrated RFI filter.
- Programming panel integrated on the front.
- Integrated braking unit.
Summary of technical specifications:
- Manufacturer: LS ( LS).
- Reference: LSLV0002M100-1EOFNA
- Rated Voltage/Frequency: single-phase 180 to 264Vac - 50/60Hz.
- Max engine power (Kw): 0.2
- Three-phase rated output current (A): 1.4
- Nominal frequency (Hz): 1.0 to 400
- Nominal input current (A): 1.8
- RFI filter: Built-in.
- Frequency tolerance +/- 5%.
- Control system: SPWM (Pulse width sinusoidal modulation. frec: 1Khz-15Khz.
- Torque characteristics: Including torque compensation and slip compensation, the starting torque can be 150% at 5Hz.
- Overload capacity: 150% of the rated current for 1 minute.
- Model V/F: Model V/F adjustable.
- Level of protection against blocking: Adjustment from 20 to 200% of the rated current.
- Frequency adjustment: by means of keys, potentiomentro or external signals.
- Gear/stop signal: by means of external keys or signals.
- Multifunction input signal.
- Multifunction output indicator.
- Potentiometer: integrated.
- Integrated braking unit (1.5-2.2Kw).
- Selectable PNP/NPN input signal.
- Boost: Manual/automatic.
- Process control: Advanced PID.
- Automatic rearrangement after power failure.
- Braking by direct current injection.
- Inputs/outputs: 5 programmable.
- Analog input: 0..10Vcc/4-20mA.
- Protection level: IP20
- Failure history.
- Monitoring and parameterization by PC.
- Protection: Self-diagnosis, overvoltage, overcurrent, low voltage, overload, overheating, external failure, electronic thermal current.
- Refrigeration: forced ventilation.
- Mounting: By screws or din-rail.
- Dimensions: Height 145mm x Width 85mm x Depth 100mm.
To download the full features, quick guide or manual click on the "ATTACHMENTS" tab.
Other powers or specifications consult.
English 
Español
Italiano
Adajusa FRANCE
Adajusa PORTUGAL
