Solenoid valve fluids 1/8 3/2 open direct drive...
Solenoid valve fluids 1/8 3/2 open direct drive D.1,4

Solenoid valve fluids 1/8 3/2 open direct drive D.1,4

€22.55 Tax included

€18.64 tax excl.

Electrovalve for home automation,fluids or process control, threaded 1/8"body in brass. Direct drive, 3-way open(NA) electrovalve, Ø of the actuator for 10mm coil.

Step diameter: 1.4 mm. Exhaust diameter: 1.5 mm

Pressure max. 40 bar. Min pressure: 0 bar.

fluids:

  • air.
  • Inert gas.
  • Water (max. 75ºC).
  • Mineral oils.
  • Gasoleos.

Esquema neumático electroválvula 3 vías mando directoManufacturer: Aignep
Reference: 01F02415N0
Representative image for illustrative purposes, the article supplied will correspond to the specifications indicated.

No queries yet, leave the first!
 

1/8" direct drive solenoid valve, 3-way, normally open (NA), for use with fluids or air, with indirect drive. Brass body and coil control in stainless steel.

Pitch diameter: 1.4 mm. Exhaust diameter: 1.5 mm

In this type of solenoid valves, direct drive, can work from 0 bar of pressure to the maximum working pressure.

The working pressure ranges are:

  • Minimum pressure differential between inlet and outlet (ΔP bar): 0 bar.
  • Maximum pressure differential between inlet and outlet (ΔP bar):
    • With coil size 22mm of 6.5W: 15.6 bar.
    • With coil size 22mm of 7.5VA: 19.2 bar.
    • With coil size 30mm of 8W: 40 bar.
    • With coil size 30mm of 11VA: 40 bar.
  • Maximum permissible pressure: 40 bar

Compatible coils for this type of solenoid valve are range SOL10 (22 mm) and SOL11 (30mm) for cores of diameter 10 (Coil not included)

The solenoid valve is normally open, that is, without tension in the coil, the fluid or air will be passed through the solenoid valve, when the coil is put into tension the passage of the fluid or air will be interrupted.

The fluids with which this solenoid valve can work are:

  • Air.
  • Inert gases.
  • Water (maximum temperature 75ºC).
  • Mineral oils.
  • Diesel.
  • Fuel oil.

Specifications:

  • Manufacturer: Aignep
  • Reference: 01F 02 4 15 N0
  • Type of control: direct drive.
  • Thread size: 1/8".
  • number of tracks: 3.
  • number of positions: 2.
  • Configuration: 3/2 open (NA).
  • Operator shaft diameter (for coil): 10mm.
  • Body: Brass.
  • Guide tube, cores and spring: Inox.
  • Gasket type: NBR.
  • Type of fluids: Pressurized air, water (max. 75ºC), mineral oils, diesel, fuel oil.
  • Maximum pressure: 40 bar.
  • ISO 228 size: 1/8".
  • pitch diameter: 1.4mm.
  • Exhaust diameter: 1.5mm.
  • Maximum fluid viscosity (cSt): 25.
  • Valve coefficient (Kv): 0,05 m³/h.
  • Minimum pressure differential (ΔP bar): 0 bar.
  • Maximum pressure differential (ΔP bar): 40 bar depending on the power of the coil.
  • Working temperature of the solenoid valve: -10ºC to +80ºC.
  • Fluid temperature: -10ºC to +90ºC.

Dimensiones electrovalvula 2/2 mando directo
Material for professional use, install in compliance with the regulations in force at the place of installation.

To expand the information you can download the technical sheet by clicking on the "Attachments" tab

Questions

Be the first to ask a question about this product!

Question about the product

* Required fields
(read)

16 other products in the same category:

Customers who bought this product also bought:

Reviews
Product added to wishlist
Product added to compare.